On May 1, 11:24=A0am, BH <bha...@[EMAIL PROTECTED]
> wrote:
> On May 1, 12:17=A0am, G-squared <stratu...@[EMAIL PROTECTED]
> wrote:
>
>
>
>
>
> > =A0On Apr 30, 5:31=A0pm, BH <bha...@[EMAIL PROTECTED]
> wrote:
> > =A0> On Apr 30, 8:24=A0pm, rlew...@[EMAIL PROTECTED]
(Cass Lewart)
wrot=
e:
> > =A0>
> > =A0> > BH (bha...@[EMAIL PROTECTED]
) wrote:
> > =A0>
> > =A0> > : Can anyone tell me if this amp will work with HD? Thanks!
> > =A0> > : Bruce
> > =A0>
> > =A0> > Try it or check the specs that it covers UHF, I am using a RS
in
> > =A0> > line RF amplifier for around $30 and it works great.
> > =A0> > Cass
> > =A0>
> > =A0> Hello again:
> > =A0>
> > =A0> It is obvious that I asked my question poorly. The installation
in
> > =A0> question was done by me 4 years ago and consists of ~ 10 outlets.
> > It
> > =A0> has performed quite well with excellent picture quality. The
owner
> > got
> > =A0> a new Panasonic 42" plasma last week and pix breaks up on the HD
> > =A0> channels often. Initially it was a HDMI set up with a Audio Video
> > =A0> receiver in the system. Initially we pulled out the receiver and
> > got
> > =A0> no improvement. It is now just the cable line direct to the TV
and
> > =A0> seems to be OK. The cable co. says the amp will not pass the HD
> > signal
> > =A0> (????) and that is why I asked about this model amp. Their
> > statement
> > =A0> was that it was fine for analog but not for digital.
> > =A0>
> > =A0> Thanks,
> > =A0>
> > =A0> Bruce
>
> > Actually analog is more difficult than digital. Once you get more than
> > 15 dB signal-to-noise you're pretty much home free with digital. 15 dB
> > in analog is the PITS. Perhaps Elmo would find it OK since he can
> > still see the story. That amp is good from channel 2 (50MHz) to
> > channel 83 (950MHz) and fine for analog and digital. Cable folks are
> > mistaken.
>
> > GG
>
> Thanks for you responses. This is what I thought but having retired a
> few years ago and not fully up on current products I needed the help.
>
> Thanks again.
>
> Bruce- Hide quoted text -
>
> - Show quoted text -
Update.
This amp will not work for my situation. Seems that the new SA cable
box requires two way communication to function and my amp does not
allow that. Live and learn I guess.
Thanks!
|
